Commercial Pricing & Services
Transparent, sliding-scale commercial pricing for Electrical Inspections, M&E Engineering, and Statutory Compliance across the West Midlands.
Important Pricing Notice
All prices listed or generated by these calculators are "From" estimates. Final pricing is strictly subject to change and is highly dependent on site location, travelling expenses, and out-of-hours scheduling. Sites requiring specialist high-level access equipment—such as MEWPs, cherry pickers, or scaffolding platforms—will incur additional equipment hire charges.
Core Standard Contracting Rates
Reactive Maintenance
Rapid fault finding, emergency power restoration, and call-out services across the West Midlands. Designed to minimise operational downtime.
- Subsequent Hours From £60.00 / hr
- Out of Hours (Emergency) From £120.00 / hr
- Temporary Generator Setup From POA
Commercial Contracting
Standard base day rate for a fully qualified Senior Electrical Inspector. Applicable for planned preventative maintenance (PPM) and fit-outs.
- Half Day Rate (Up to 4 hrs) From £200.00
- Electrical Mate / Improver From £180.00 / Day
- Bespoke Project Management From POA
Distribution & Switchgear
Upgrades for commercial and industrial low-voltage main distribution panels. Ensuring BS 7671:2018+A3:2024 compliance and load stability.
- Single Phase DB Replacement From £450.00
- Three Phase TPN Board From £850.00
- Surge Protection (SPD) Addition From £150.00
Instant Compliance Quotes
Electrical Installation Condition Report (EICR)
NICEIC-approved fixed wire testing. Our commercial EICR pricing operates on a sliding scale. The more circuits your site requires testing, the more cost-effective the per-circuit rate becomes.
Estimated Cost (Ex. VAT)
From £0.00 Enter circuits to view ratePortable Appliance Testing (PAT)
Risk-assessed testing designed to offer maximum economies of scale for commercial and industrial clients. Includes free minor repairs to keep your equipment operational.
Estimated Cost (Ex. VAT)
From £0.00 Enter appliances to view rateThermal Imaging Surveys
Non-intrusive electrical thermographic surveys to detect dangerous faults without shutting down power. Conducted by fully qualified electricians permitted to safely remove live panel covers.
Estimated Cost (Ex. VAT)
From £0.00 Enter panels to view rateEmergency Light Testing (EML)
Statutory functional checks and annual 3-hour discharge tests with complete digital logbook management to guarantee your facility remains 100% compliant with UK fire safety legislation.
Estimated Cost (Ex. VAT)
From £0.00 Enter luminaires to view rateSpecialist Electrical Engineering Services
HVAC Electrical Systems
- AHU & Chiller Power: Installation of dedicated high-amperage sub-mains and local isolation for Air Handling Units, chillers, and heat pumps.
- Control Panel Building: Custom manufacturing, wiring, and termination of HVAC control panels and motor control centres (MCCs).
- VFD Integration: Fitting and programming Variable Frequency Drives to control pump and fan motor speeds.
- BMS Field Wiring: Routing power and signal cabling for building management system sensors, actuators, and valves.
- Trace Heating: Installation of self-regulating electrical heating cables on pipework to prevent freezing.
Extraction & Ventilation
- Industrial Fan Connections: Three-phase power wiring and final terminations for high-volume extraction fans.
- Inverter Speed Controls: Wiring variable speed controllers for commercial kitchen hoods and factory extraction.
- Fire Damper Controls: Integrating motorized fire and smoke dampers into the central fire alarm system.
- Air Proving Switches: Installing and calibrating differential pressure switches to verify physical airflow.
- Environmental Sensor Links: Wiring carbon monoxide (CO), carbon dioxide (CO2), and humidity sensors to automated fan starters.
LV Power Distribution
- Main Switchgear: Installation, upgrading, and termination of Low Voltage switchboards and air circuit breakers (ACBs).
- Distribution Boards: Fitting localized 3-phase and single-phase distribution boards (DBs) and consumer units.
- Sub-Main Cabling: Routing and terminating heavy steel wire armoured (SWA) cables across facilities.
- Busbar Trunking: Installing overhead busbar systems for flexible power distribution in plant rooms and factories.
- Power Factor Correction: Fitting PFC capacitor banks to optimize energy efficiency and eliminate reactive power charges.
- Surge Protection: Installing Type 1, 2, and 3 Surge Protection Devices (SPDs) to safeguard electronic components.
Sub-System Infrastructure
- Cable Containment: Installing heavy-duty cable trays, ladder racks, metal trunking, and steel conduits.
- Earthing & Bonding: Executing main equipotential bonding to water, structural steel, and HVAC ductwork.
- Local Maintenance Isolation: Fitting lockable rotary isolators adjacent to all mechanical plant and motors.
- Emergency Stop Circuits: Wiring safety-relayed E-stop buttons around high-powered mechanical plant.
- Uninterruptible Power: Integrating UPS systems and central battery units for critical environmental controls.
Life Safety & Security
- Fire Alarm Systems: Wiring addressable fire detection, aspirating smoke systems (VESDA), and voice alarms.
- Emergency Lighting: Installing emergency escape route lighting, illuminated exit signs, and central test switches.
- Access Control: Powering and wiring biometric readers, mag-locks, intercoms, and automated speed gates.
- CCTV Infrastructure: Providing dedicated power containment and wiring for IP security cameras.
Statutory Inspection & Testing
- EICR Certification: Comprehensive Electrical Installation Condition Reports and fixed wire testing for insurance compliance.
- Thermal Imaging: Infrared thermographic surveys of switchgear, control panels, and VFDs to detect hot spots.
- Emergency Light Testing: Execution of monthly functional checks and annual 3-hour discharge tests with full logging.
- Earth Loop Impedance Testing: Verifying disconnection times and continuity across all mechanical plant and distribution circuits.